xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 134. OSPF Area Settings example window
See the parameter descriptions below for information on the
OSPF Area ID Settings
.
The
Area ID
settings are as follows:
Parameter
Description
Area ID
A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the
OSPF area in the OSPF domain.
Type
This field can be toggled between
Normal
and
Stub
using the space bar. When it is toggled to
Stub
, additional fields appear
−
Stub Import Summary LSA,
and the
Stub
Default Cost
.
Stub Import
Summary LSA
Displays whether or not the selected Area will allow Summary Link-State Advertisements
(Summary LSAs) to be imported into the area from other areas.
Stub Default Cost
Displays the default cost for the route to the stub of between 0 and 65,535. The default is 1.
OSPF Interface Settings
To set up OSPF interfaces, click
Configuration > Layer 3 IP Networking > OSPF > OSPF Interface Settings
to view OSPF
settings for existing IP interfaces. If there are no IP interfaces configured (besides the default System interface), only the System
interface settings will appear listed. To change settings for in IP interface, click on the hyperlinked name of the interface to see the
configuration menu for that interface.
Figure 6- 135. OSPF Interface Settings window
154
Содержание TM DES-6500
