D-Link TM DES-6500, Руководство пользователя

Страница: 54 / 353

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Static Router Port Settings
A static router port is a port that has a multicast router attached to it. Generally, this router would have a connection to a WAN or
to the Internet. Establishing a router port will allow multicast packets coming from the router to be propagated through the
network, as well as allowing multicast messages (IGMP) coming from the network to be propagated to the router.
A router port has the following behavior:
All IGMP Report packets will be forwarded to the router port.
•
•
•
IGMP queries (from the router port) will be flooded to all ports.
All UDP multicast packets will be forwarded to the router port. Because routers do not send IGMP reports or
implement IGMP snooping, a multicast router connected to the router port of a Layer 3 switch would not be able to
receive UDP data streams unless the UDP multicast packets were all forwarded to the router port.
A router port will be dynamically configured when IGMP query packets, RIPv2 multicast, DVMRP multicast or PIM-DM
multicast packets are detected flowing into a port.
Open the IGMP Snooping folder and the click on the Static Router Ports Settings link to open the Static Router Ports Entries
page, as shown below.
Figure 6- 13. Static Router Ports Settings window
The Static Router Ports Settings page (shown above) displays all of the current entries to the Switch's static router port table. To
modify an entry, click the Modify button. This will open the Static Router Ports Settings - Edit page, as shown below.
Figure 6- 14. Static Router Ports Settings - Edit window
The following parameters can be set:
Parameter Description
VID (VLAN ID) Enter the VLAN ID which, along with the VLAN Name, identifies the VLAN where the multicast
router is attached.
VLAN Name This is the name of the VLAN where the multicast router is attached.
Unit Choose the Switch ID number of the line card in the chassis to be modified.
Port Settings These are the ports on the Switch that will have a multicast router attached to them.
Static – Choose these ports to be connected to a multicast enabled router.
Forbidden – Choose these ports to be forbidden from being connected to a multicast enabled
router.
Click Apply to implement the new settings, Click the Show All Static Router Port Entries link to return to the Current Static
Router Port Entries window.
39