xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
fields. Pull the
State
pull-down menu to
Enabled
and
click
Apply
to enter to make the IP interface effective. To view entries in
the
IP Interface Table
, click the
Show All IP Interface Entries
hyperlink. Use the
Save Changes
dialog box from the
Maintenance
folder to enter the changes into NV-RAM.
The following fields can be set:
Parameter
Description
Interface Name
This field displays the name for the IP interface. The default IP interface is named “System”.
Secondary
– Click the check box to set the IP interface as a
secondary IP interface.
Secondary
interfaces can only be configured if a
primary
interface is first configured.
IP Address
This field allows the entry of an IP address to be assigned to this IP interface.
Subnet Mask
This field allows the entry of a subnet mask to be applied to this IP interface.
VLAN Name
This field allows the entry of the VLAN Name for the VLAN the IP interface belongs to.
State
This field may be altered between
Enabled
and
Disabled
using the pull down menu. This
entry determines whether the interface will be active or not.
Link Status
This read only field states the current status of the IP Interface on the Switch.
Link Up
denotes that the IP interface is up and running on the Switch.
Link Down
will denote that the
IP interface is not currently set and/or enabled on the Switch.
Click
Apply
to implement changes made.
127
Содержание TM DES-6500
