GLV-540 User Manual
33
5.1.5
User Privilege
GLV defines two privilege levels for its users.
o
Administrator: A user with this privilege can modify system and
individual user configuration.
o
User: A user with this privilege can view system parameters but modify
only self user profile and SIP account parameters.
Note
:
Administrator privilege does not have a user profile and SIP account
associated with it. Consequently calls cannot be initiated or received by
administrator. A user privilege is required to initiate and receive calls.
Administrator privilege provides access to entire phone configuration
parameters through LCD and GUI.
Please refer to section 5.1.12 for more information on access restrictions that
apply to user and admin privilege.
The default password for User to login through GUI or LCD is “123”.
5.1.6
Multi Line
Multi Line feature of GLV-540 facilitates initiating and receiving multiple calls.
GLV has three Line buttons (L1, L2 and L3). Each line can support at most one
call. Line buttons have a LED, which will glow during a call and blink upon
arrival of an incoming call.
At any instant of time, only one Line can be active (Call on the Line is
connected and media / voice is flowing), all other Lines will be inactive (line is
not in use or Call on the line is placed on Hold). The exception is 3-Way-
Conference, where in both the lines participating in the conference are active.
Note
:
To Select a Line (LI / L2 / L3), press the associates line button. Taking the
Handset/ Headset/ Speaker when the phone is idle (not in call) will select any
one of available lines.
Note
:
Incoming calls for a configured SIP account will use the user profile associated
with that SIP account. Incoming calls will attempt to use any of the available
Lines (L1 /L2 /L3).
.
5.1.7
Auto Configuration
This feature helps to configure the GLV-540 automatically. Auto Configuration
can be either performed with DVX-1000(D-Link IPPBX) or with TFTP server or
with HTTP or HTTPS. The provision server address can be configured statically
or obtained from DHCP response () or sip server (). Auto Configuration can be
scheduled to do Once or periodically (configurable interval, in days) or after
each Factory Reset.
5.1.8
Configuration Backup and Restore
GLV-540 provides functionality to backup and restore phone configuration
through web and LCD. The configuration parameters that can be modified
through configuration back and restore depend on the user privilege.
Based on the privilege of the logged in user, the following operations are
performed:
