D-Link GLV-540 Скачать руководство пользователя страница 60

Страница: 60 / 117

GLV-540 User Manual

Network Configuration : IP Settings : PPPoE Parameters

User Name

This is used in PPPoE mode to authenticate with PPPoE
server.

Value Range

: Accepts alphanumeric characters, hyphen,

underscore, *, #, @ (max 30 chars)

Default Value:

Password

This is used in PPPoE mode to authenticate with PPPoE
server

Value Range

: Accepts alphanumeric characters, hyphen,

underscore, *, #, @ (max 30 chars)

Default Value

Idle Timeout

If the PPPoE session is inactive for timeout specified in this
field then the session would be terminated.

Value Range

: 0 to 3600 seconds

Default Value

: 900 seconds

Note

: When Idle Timeout is zero, the session would be active

for infinite time.

Network Configuration : Time Settings

Mode

This mode provides you the option of setting the time either
by setting manually or retrieving from the configured NTP
servers.

Value Range

: <Manual> <NTP>

Default Value

:<NTP>

Primary
Server

This specifies the NTP Primary server. This is used only when
the “Mode” is selected as NTP, it can have IP address or
domain name. There are many NTP servers in the Internet
like ntp1.dlink.com, ntp.dlink.com.tw, pool.ntp.org, etc.

Value Range

: Any valid IP address or domain name (max 50

characters) in dot separated form.

Default Value

: ntp1.dlink.com

Secondary
Server

This is an optional field which

specifies the NTP Secondary

server. This is used only when the “Mode” is selected as NTP
and the primary server has failed. It can have IP address or
domain name.

Value Range

: Any valid IP address or domain name (max 50

characters) in dot separated form.

Default Value

: pool.ntp.org

Zone

This is a drop down list to select the time zone where your
device is located.

Value Range

: List of available Time Zones

Default Value

: GMT +05:30 India, Calcutta.

Date & Time

In manual mode, the device time can be configured in YYYY-
MM-DD Hrs:Min:Sec (Year-Month-Date Hours: Minutes:
Seconds) format.

Value Range

: Date Format as

Year:Month:Date:Hours:Min:Sec

Default Value

: 2007-01-01 12:30:00

Содержание GLV-540






















































































































Результаты поиска

Содержание GLV-540

Отзывы:

Похожие инструкции для GLV-540

Бренды по названию

Популярные бренды

D-Link GLV-540, Руководство пользователя

Результаты поиска

Содержание GLV-540

Отзывы:

Похожие инструкции для GLV-540

Бренды по названию

Популярные бренды