D-Link GLV-540 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 117

background image

GLV-540 User Manual

35

5.1.9

Factory Reset

GLV-540  allows  Factory  Reset  of  complete  System  or  All  Users  or  for
Individual Users.

In system Factory Reset all the system parameters will be reset to the factory
default values. All existing users and account will be removed and only default
user and account will remain.

In case of  All  Users Factory  Reset, all  users  profile  parameters will  be  set to
default  values.  Parameters  of  the  Account  associated  with  the  users  are  not
modified.  The  user  status  for  all  users  except  the  default  user  is  changed  to
“NOT AVAILABLE”.

During  Individual  user  Factory  Reset,  only  that  users  profile  parameters  will
be reset. In this case also associated account’s parameters are not modified.

5.1.10

Software Upgrade

GLV-540  provides  a  facility  to  upgrade  the  software  through  web  and  LCD.
When initiating upgrade through Web, it can be configured to perform from a
TFTP  /  HTTP  server.  User  can  also  configure  the  server  address  and  Port
statically  or  to  get  these  parameters  from  a  DHCP  server  (This  requires  the
phone  to  be  in  DHCP  mode).  Upgrade  can  be  scheduled  to  occur  once  or
periodically  (configurable  interval  in  number  of  days)  or  after  each  Factory
Reset.

Software upgrade can also be initiated through LCD. In this case the existing
configuration  for  software  upgrade  parameters  is  utilized.  The  option  to
configure software upgrade parameters through LCD is not available.

To perform software upgrade a TFTP/HTTP server is required to be setup.
This server will hold the files that will upgrade the existing software.

To initiate software upgrade through the Web

o

Click on the Device Management->Software link in the IP Phone GUI.

o

Click on Enable radio button to enable software upgrade configuration

o

Select server type as TFTP or HTTP.

o

Select Server address option “Static”.

o

Enter the IP address and port where TFTP/HTTP server is running.
TFTP default port is 69 and HTTP default port is 80.

o

When the server type is HTTP, proxy server address, port, user name
and password can be configured.

o

Enter the software upgrade filename.

o

Select upgrade schedule as “Once Now”

o

Click on “Save” and Apply Changes.

Note

:

Once the software upgrade is started all line LED’s will start blinking to
provide a visual indication for software upgrade in progress.

The phone cannot be used to initiate or receive calls while software
upgrade is being performed.

The software upgrade status can be viewed through Web on “Device
Monitor

Upgrade History” page.

While going for  Software upgrade  when system configuration parameters are
not available, software  upgrade would be initiated with default values. Phone
uses  default  values  like  for  IP  address  value shall  be  “10.0.0.1”,  Netmask  as

«
...
33
34
35
36
37
...
»

Содержание GLV-540






















































































































Отзывы:

Нет отзывов

Похожие инструкции для GLV-540

OFFICESERV 100 Series

Бренд: Samsung Страницы: 22

Бренд: Damall Страницы: 7

UNIVERGE SV8100 DT7 SERIES

Бренд: NEC Страницы: 16

Бренд: Archos Страницы: 115

Бренд: Samsung Страницы: 119

Бренд: Samsung Страницы: 125

Бренд: Samsung Страницы: 104

Бренд: Zte Страницы: 16

Бренд: Zte Страницы: 168

Бренд: Zte Страницы: 90

Бренд: Avvio Страницы: 30

Бренд: Zte Страницы: 172

Cybershot C510a

Бренд: Sony Ericsson Страницы: 83

Бренд: Pantech Страницы: 78

Бренд: UTStarcom Страницы: 76

Бренд: UTOK Страницы: 131

Бренд: Mitsubishi Страницы: 73

Бренд: Zte Страницы: 135

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды