GLV-540 User Manual
28
4.4.7
E.164 Calls
E.164 or ENUM (Electronic Number Mapping) facilitates calling VoIP users
from IP and PSTN networks. To make a call to an E.164 number enter the
PSTN number in the following format:(
Maximum 30 digits
)
+(Country Code) (Area Code) (Telephone Subscriber number)
For example
: +918026788345
It is also possible to configure the Area code in GUI. User can configure
“9180” as area code and dial +26788345. The phone will prefix the area code
and dial out. There is an enable/disable option in GUI. If disabled, phone will
dial +26788345 directly.
Note
: To dial the ‘+’ character, repeatedly press the numeric key ‘1’ or ‘0’ till
the ‘+’ character is displayed on the LCD, also keypad should be in
Alphanumeric mode.
Note:
To dial the IP address using special characters change the key mode to
Alphanumeric, refer section 5.1.14 Key Mode.
4.4.8
Call using a specific SIP Account
GLV supports selecting a specific user profile while initiating an outgoing call.
The SIP account associated with the selected user profile will be used to make
the call.
To initiate an outgoing call through a specific SIP account, select a user profile
associated with that SIP account: - (Any available Line can be used by all the
configured user profiles)
o
Select any available line by pressing the Line Key (L1/ L2 / L3)
o
Press the “USER” key on the keypad
o
Select a user profile from the list of Users displayed on the LCD.
o
Dial the destination phone number
Note:
Please read sections 5.1.1, 5.1.3, 5.1.4 and 5.1.2 of this user manual for
more information on multiple user and SIP account features.
