D-Link DGS-3130 Series Скачать руководство пользователя

Страница: 85 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

function. If disabled, the local relay function will always add Option 37 to request packets, whether the state of Option

37 is enabled or disabled. The DHCPv6 local relay function will directly forward the packet from the server to the

client.
To view the following window, click

Management > DHCP > DHCPv6 Relay > DHCPv6 Local Relay VLAN

, as

shown below:

Figure 4-60 DHCPv6 Local Relay VLAN Window

The fields that can be configured are described below:

Parameter

Description

DHCPv6 Local Relay VID

List

Enter the DHCPv6 local relay VLAN ID(s) here. More than one VLAN ID can be

entered here. Select the

All VLANs

option to apply this setting on all configured

VLANs on this Switch.

State

Select to enable or disable the DHCPv6 local relay feature on the specified

VLAN(s) here.

Click the

Apply

button to accept the changes made.

NOTE: When the state of the DHCPv6 relay port is disabled, the port will not relay or locally relay

received DHCPv6 packets.

DHCP Auto Configuration

This window is used to display and configure the DHCP auto-configuration function.
To view the following window, click

Management > DHCP Auto Configuration

, as shown below:

Figure 4-561 DHCP Auto Configuration Window

The fields that can be configured are described below:

Parameter

Description

Auto Configuration State

Select this option to enable or disable the auto-configuration function.

Click the

Apply

button to accept the changes made.

DNS

The Domain Name System (DNS) is used to map human-readable domain names to the IP addresses used by

computers to communicate. A DNS server performs name-to-address translation, and may need to contact several

name servers to translate a domain to an address. The address of the machine that supplies domain name service is

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды