DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
197
The fields that can be configured are described below:
Parameter
Description
IP Address
Select and enter the single IPv4 address here.
Network Address
Select and enter the IPv4 network address here. In the first space enter the
network prefix and in the second space enter the network mask.
RIP
Select this option to display only RIP routes.
OSPF
Select this option to display only OSPF routes.
Connected
Select this option to display only connected routes.
Summary
Select this option to display a summary and count of the route sources
configured on this Switch.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
IPv6 Static/Default Route
This window is used to display and configure the IPv6 static or default routes.
To view the following window, click
L3 Features > IPv6 Static/Default Route
, as shown below:
Figure 6-133 IPv6 Static/Default Route Window
The fields that can be configured are described below:
Parameter
Description
IPv6 Address/Prefix Length
Enter the IPv6 address and prefix length for this route here. Tick the
Default
Route
option to use this route as the default route.
Interface Name
Enter the name of the interface that will be associated with this route here.
Next Hop IPv6 Address
Enter the next hop IPv6 address here.
Distance
Enter the administrative distance of the static route here. This value must be
between
1
and
254
. A lower value represents a better route. If not specified, the
default administrative distance for a static route is
1
.
Backup State
Select the backup state option here. Options to choose from are:
•
Primary
- Specifies the route as the primary route to the destination.
•
Backup
- Specifies the route as the backup route to the destination.
•
Weight
- Specifies the route as the ECMP route. The weight number is
always 1.
Содержание DGS-3130 Series
Страница 1: ......
