D-Link DGS-3130 Series страница 369 Скачать руководство пользователя

Страница: 369 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

358

Parameter

Description

Unit

Select the Switch unit that will be used for this configuration here.

From Port - To Port

Select the appropriate port range used for the configuration here.

Host Mode

Select the host mode option that will be associated with the selected port(s)

here. Options to choose from are

Multi Host

and

Multi Auth

. If the port is

operated in the multi-host mode, and if one of the hosts is authenticated, then

all other hosts are allowed to access the port. According to 802.1X

authentication, if the re-authentication fails or the authenticated user logs off,

the port will be blocked for a quiet period. The port restores the processing of

EAPOL packets after the quiet period. If the port is operated in the multi-

authenticated mode, then each host needs to be authenticated individually to

access the port. A host is represented by its MAC address. Only the authorized

host is allowed to access.

VID List Action

Select the VID list action here. Options to choose from are

None

Add

, and

Delete

VID List

After selecting the

Multi Auth

option as the

Host Mode

, the following

parameter is available. Enter the VLAN ID used here. This is useful when

different VLANs on the Switch have different authentication requirements. After

the client is authenticated, the client will not be re-authenticated when received

from other VLANs. This option is useful for trunk ports to do per-VLAN

authentication control. When a port’s authentication mode is changed to multi-

host, the previous authentication VLAN(s) on this port will be cleared.

CompAuth Mode

Select the compound authentication mode option here. Options to choose from

are

Any

and

MAC-WAC

•

Selecting

Any

specifies that if any of the authentication method (802.1X,

MAC-based Access Control or WAC) to passes, then pass.

•

Selecting

MAC-WAC

specifies to verify MAC-based authentication first. If

the client passes, WAC will be verified next. Both authentication methods

need to be passed.

Max Users

Enter the maximum users value used here. This value must be between 1 and

1000.

Periodic

Select to enable or disable periodic re-authentication for the selected port here.

This parameter only affects the 802.1X protocol.

ReAuth Timer

Enter the re-authentication timer value here. This value must be between 1 and

86400 seconds. By default, this value is 3600 seconds.

Inactivity State

Select to enable or disable the inactivity state here. Select the Time option to

enable this feature.

Inactivity Timer

When the

Inactivity State

is enabled, enter the inactivity timer value here. This

value must be between 120 and 65535 seconds. This parameter only affects

the WAC authentication protocol.

Restart

Enter the restart time value used here. This value must be between 1 and

65535 seconds.

Click the

Apply

button to accept the changes made.

Network Access Authentication Sessions Information

This window is used to view and clear the network access authentication session information.
To view the following window, click

Security > Network Access Authentication > Network Access Authentication

Sessions Information

, as shown below:

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды