D-Link DGS-3130 Series Скачать руководство пользователя страница 200

Страница: 200 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

189

Parameter

Description

Secondary

Tick this option to use the IPv4 address and mask as the secondary interface

configuration.

Click the

Back

button to return to the previous window.

Click the

Apply

button to accept the changes made.

Click the

Delete

button to remove the specific entry.

Enter a page number and click the

button to navigate to a specific page when multiple pages exist.

After selecting the

DHCP Client

tab, the following page will appear.

Figure 6-10 IPv4 Interface (Edit, DHCP Client) Window

The fields that can be configured are described below:

Parameter

Description

DHCP Client Client-ID

Enter the DHCP Client ID here. The range is from 1 to 4094. This parameter is

used to specify the VLAN interface whose hexadecimal MAC address will be

used as the client ID sent with the discover message.

Class ID String

Enter the class ID string here. This string can be up to 32 characters long.

Select the

Hex

option to enter the Class ID string in the hexadecimal format.

This string can be up to 64 characters long. This parameter is used to specify

the vendor class identifier used as the value of Option 60 in the DHCP discover

message.

Host Name

Enter the host name here. This string can be up to 64 characters long. This

parameter is used to specify the value of the host name option to be sent with

the DHCP discover message.

Lease

Enter and optionally select the DHCP client lease time here. In the text box the

lease time, in days, can be entered. The range is from 0 to 10000 days.

Hours

and

Minutes

can also be selected optionally.

Click the

Apply

button to accept the changes made.

IPv6 Interface

This window is used to display and configure the IPv6 interface settings.
To view the following window, click

L3 Features > Interface > IPv6 Interface

, as shown below:

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Бренды по названию

Популярные бренды