D-Link DGS-3130 Series Скачать руководство пользователя страница 81

Страница: 81 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

DHCPv6 Relay

DHCPv6 Relay Global Settings

This window is used to display and configure the DHCPv6 Relay remote ID settings.
To view the following window, click

Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings

, as

shown below:

Figure 4-546 DHCPv6 Relay Global Settings Window

The fields that can be configured in

DHCPv6 Relay Remote ID Settings

are described below:

Parameter

Description

IPv6 DHCP Relay Remote

ID Format

Select the IPv6 DHCP Relay remote ID format that will be used here. Options

to choose from are

Default, CID with User Define, User Define

, and

Expert

UDF

IPv6 DHCP Relay Remote

ID UDF

Select to choose the User Define Field (UDF) for remote ID. Options to choose

from are

ASCII

, and

Hex

•

ASCII

- Select to enter the ASCII string with a maximum of 128 characters

in the text box.

•

HEX

- Select to enter the hexadecimal string with a maximum of 256

characters in the text box.

IPv6 DHCP Relay Remote

ID Policy

Select to choose Option 37 forwarding policy for the DHCPv6 relay agent.

Options to choose from are

Keep

, and

Drop

•

Keep

- Select that the DHCPv6 request packet that already has the relay

agent Remote-ID option is left unchanged and directly relayed to the

DHCPv6 server.

•

Drop

- Select to discard the packet that already has the relay agent

Remote-ID Option 37.

IPv6 DHCP Relay Remote

ID Option

Select this option to enable or disable the insertion of the relay agent remote ID

Option 37 during the relay of DHCP for IPv6 request packets.

Click the

Apply

button to accept the changes made.

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Бренды по названию

Популярные бренды