D-Link DGS-3130 Series Скачать руководство пользователя

Страница: 389 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

378

Parameter

Description

•

Chassis

- Specifies to transmit the sender ID TLV with the chassis ID

information.

•

Manage

- Specifies to transmit the sender ID TLV with the managed

address information.

•

Chassis_Manage

- Specifies to transmit the sender ID TLV with the

chassis ID information and the managed address information.

Click the

Apply

button to accept the changes made.

After clicking the

Add MA

button, the following page will appear.

Figure 10-3 CFM Settings (Add MA) Window

The fields that can be configured are described below:

Parameter

Description

MA Name

Enter the Maintenance Association (MA) entry name here. This name can be

up to 22 characters long. Each MA in an MD must have a unique MA name.

MAs configured in different MDs may have the same MA identifier. When the

MA entry is deleted, the configuration on it is also deleted.

MA VID

Enter the Maintenance Association (MA) entry VLAN ID here. The range is from

1 to 4094.

Click the

Apply

button to accept the changes made.

Click the

Back

button to return to the previous window.

Click the

Edit

button to modify the specified entry.

Click the

Delete

button to delete the specified entry.

Click the

Add MEP

button to add a new Maintenance association End Point (MEP) entry.

After clicking the

Edit

button, the following page will appear.

Figure 10-4 CFM Settings (Add MA, Edit) Window

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды