DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
165
The fields that can be configured in
MLD Snooping Limit Settings
are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
Limit Number
Enter the limit number here. This is used to set the limitation on the number of
MLD cache entries that can be created. The range is from 1 to 4096.
Exceed Action
Select the exceed action here. This parameter specifies the action for handling
newly learned groups when the limitation is exceeded.
Options to choose from are
Default
,
Drop
and
Replace
.
•
Default
- Specifies that the default action will be taken.
•
Drop
- Specifies that the new group will be dropped.
•
Replace
- Specifies that the new group will replace the oldest group.
Except ACL Name
Enter the standard IP access list name here. The group (*,G) permitted by the
access list will be excluded from the limit. To permit a group (*,G), specify “any”
in the source address field and G in the destination address field of the access
list entry. This name can be up to 32 characters long. Alternatively, click the
Please Select
button to find and select any of the exiting access lists
configured on this Switch to be used in this configuration.
VID
Enter the Layer 2 VLAN name on a trunk port here. This applies the filter to
packets that arrive on that VLAN. The range is from 1 to 4094.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to delete an entry based on the information entered.
The fields that can be configured in
Access Group Settings
are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
Action
Select
Add
to add a new entry based in the information entered.
Select
Delete
to delete an entry based in the information entered.
ACL Name
Enter the standard IP access list name here. This is used to permit users to join
a group (*, G), specify “any” in source address field and G in destination
address field of the access list entry. This name can be up to 32 characters
long. Alternatively, click the
Please Select
button to find and select any of the
exiting access lists configured on this Switch to be used in this configuration.
VID
Enter the VLAN ID used for this configuration here. The range is from 1 to
4094.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
MLD Snooping Filter Table
are described below:
Parameter
Description
Unit
Select the Switch unit ID that will be used here.
From Port - To Port
Select the Switch port range that will be used here.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Show All
button to display all the entries.
Click the
Show Detail
button to view more detailed information about the entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Содержание DGS-3130 Series
Страница 1: ......
