D-Link DGS-3130 Series Скачать руководство пользователя

Страница: 77 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

To view the following window, click

Management > DHCP > DHCP Relay > DHCP Relay Information Settings

, as

shown below:

Figure 4-491 DHCP Relay Information Settings Window

The fields that can be configured are described below:

Parameter

Description

Information Trust All

Select this option to enable or disable the DHCP relay agent to trust the IP

DHCP relay information for all interfaces.

information Check

Select this option to enable or disable the DHCP relay agent to validate and

remove the relay agent information option in the received DHCP reply packet.

Information Policy

Select the Option 82 re-forwarding policy for the DHCP relay agent. Options to

choose from are

Keep

Drop

, and

Replace

•

Keep

- Select to keep the packet that already has the relay option. The

packet is left unchanged and directly relayed to the DHCP server.

•

Drop

- Select to discard the packet that already has the relay option.

•

Replace

- Select to replace the packet that already has the relay option.

The packet will be replaced with a new option.

Information Option

Select this option to enable or disable the insertion of relay agent information

(Option 82) during the relay of DHCP request packets.

Click the

Apply

button to accept the changes made.

Click the

Edit

button to modify the corresponding interface.

Enter a page number and click the

button to navigate to a specific page when multiple pages exist.

DHCP Relay Information Option Format Settings

This window is used to display and configure the DHCP information format.

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды