D-Link DGS-3130 Series Скачать руководство пользователя страница 275

Страница: 275 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

264

Click the

Apply

button to accept the changes made.

After clicking the

Policer

button, the following page will appear.

Figure 7-18 Policy Map (Policer) Window

The fields that can be configured are described below:

Parameter

Description

None

Select this option to specify that no policer settings will be configured for this

entry.

Specify

Select this option to specify that the following policer settings will be applied to

this entry.

Average Rate

Enter the average rate value here. The range is from 0 to 10000000 Kbps.

Normal Burst Size

Enter the normal burst size value here. The range is from 0 to 16384 Kbps.

Maximum Burst Size

Enter the maximum burst size value here. The range is from 0 to 16384 Kbps.

Conform Action

Select the conform action that will be taken here. This action will be taken on

green color packets. Option to choose from are:

Drop

- Specifies that the conform action is to drop the packet.

Set-DSCP-Transmit

- Specifies that the conform action is to modify the DSCP

value and then to transmit the packet with the new DSCP value. Enter the new

DSCP value in the space provided.

Set-1P-Transmit

- Specifies that the conform action is to modify the 802.1p

value and then to transmit the packet with the new 802.1p value. Enter the new

802.1p value in the space provided.

Transmit

- Specifies that the conform action is to transmit the packet

unmodified.

Set-DSCP-1P

- Specifies that the conform action is to modify the DSCP and

802.1p values and then to transmit the packet with the new DSCP and 802.1p

values. Enter the new DSCP and 802.1p values in the spaces provided.

Exceed Action

Select the exceed action that will be taken here. This action will be taken on

yellow color packets that exceed the rate limit. Option to choose from are:

Drop

- Specifies that the exceed action is to drop the packet.

Set-DSCP-Transmit

- Specifies that the exceed action is to modify the DSCP

value and then to transmit the packet with the new DSCP value. Enter the new

DSCP value in the space provided.

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Бренды по названию

Популярные бренды