D-Link DGS-3130 Series Скачать руководство пользователя

Страница: 28 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

Figure 3-123 PoE Status Window

The fields that can be configured for

PoE Status

are described below:

Parameter

Description

Unit

Select the stacking unit ID of the Switch that will be configured here.

From Port - To Port

Select the appropriate port range used for the configuration here.

Description

Enter the text that describes the PD connected to a PoE interface. The

maximum length is 32 characters.

Click the

Apply

button to accept the changes made.

Click the

Delete Description

button to remove the description from the entry.

PoE Configuration

This window is used to display and configure the PoE configuration settings.

NOTE: If the Switch failed to supply power to the IEEE 802.3at Powered Device (PD),

•

Check if the PD connected to the port supports the IEEE 802.3at standard

•

Manually configure the PoE power limit value to 30 Watts for the corresponding port

To view the following window, click

System > PoE > PoE Configuration

, as shown below:

Figure 3-134 PoE Configuration Window

The fields that can be configured for

PoE Configuration

are described below:

Parameter

Description

Unit

Select the stacking unit ID of the Switch that will be configured here.

From Port - To Port

Select the appropriate port range used for the configuration here.

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды