DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
216
To view the following window, click
L3 Features > OSPF > OSPFv2 > OSPFv2 Virtual Link Settings
, as shown
below:
Figure 6-46 OSPFv2 Virtual Link Settings Window
The fields that can be configured in
OSPF Virtual Link
are described below:
Parameter
Description
Area ID
Select and enter the OSPFv2 area ID here. This can be specified in the IP
address format or in the decimal value format. The decimal range is from 0 to
4294967295. This area will be used to establish the virtual link.
Router ID
Enter the router ID of the virtual link neighbor here.
Hello Interval
Enter the hello packet interval that the router sends on the virtual link here. The
range is from 1 and 65535 seconds.
Select the
Default
option to use the default value, which is 10 seconds.
Dead Interval
Enter the Dead Interval time after which a neighbor is regarded as offline if no
hello packets are received within that time frame here. The range is from 1 and
65535 seconds.
Select the
Default
option to use the default value, which is 40 seconds.
Authentication
Select the authentication type used here. Options to choose from are
None
,
Simple Password
, and
MD5
.
Password
After selecting the
Simple Password
authentication type, enter the password
to be used here. This password can be up to 8 characters long.
MD5 Key ID
After selecting the
MD5
authentication type, enter the MD5 authentication key
ID here. The range is from 1 to 255.
MD5 Key
After selecting the
MD5
authentication type, enter the MD5 authentication key
here. This key can be up to 16 characters long.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to delete the specified entry.
Click the
Area ID
link (
0.0.0.1
) to view more detailed settings about the entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Содержание DGS-3130 Series
Страница 1: ......
