D-Link DGS-3130 Series Скачать руководство пользователя

Страница: 274 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

263

Click the

Apply

button to accept the changes made.

The fields that can be configured for

Traffic Policy

are described below:

Parameter

Description

Policy Map Name

Enter the policy map name here. This name can be up to 32 characters long.

Class Map Name

Enter the class map name here. This name can be up to 32 characters long.

Click the

Apply

button to accept the changes made.

Click the

Delete

button to remove the specific entry.

Enter a page number and click the

button to navigate to a specific page when multiple pages exist.

Click the

Set Action

button to configure the set action settings for the specified entry.

Click the

Policer

button to configure the policer settings for the specified entry.

Enter a page number and click the

button to navigate to a specific page when multiple pages exist.

After clicking the

Set Action

button, the following page will appear.

Figure 7-17 Policy Map (Set Action) Window

The fields that can be configured are described below:

Parameter

Description

None

Select this option to specify that no action will be taken.

Specify

Select this option to specify that action will be taken based on the

configurations made.

New Precedence

Select the new precedence value for the packet here. The range is from 0 to 7.

Select the

IPv4 only

option to specify that IPv4 precedence will be marked

only. If not selected, then both IPv4 and IPv6 precedence will be marked. For

IPv6 packets, the precedence is the most three significant bits of the traffic

class of the IPv6 header. Setting the precedence will not affect the CoS queue

selection.

New DSCP

Select the new DSCP value for the packet here. The range is from 0 to 63.

Select the

IPv4 only

option to specify that the IPv4 DSCP will be marked only.

If not selected, then both the IPv4 and IPv6 DSCP will be marked. Setting the

DSCP will not affect the CoS queue selection.

New CoS

Select the new CoS value to the packet here. The range is from 0 to 7. Setting

the CoS will not affect the CoS queue selection.

New Cos Queue

Select the new CoS queue value to the packets here. This will overwrite the

original CoS queue selection. Setting the CoS queue will not take effect if the

policy map is applied for the egress flow on the interface.

Click the

Back

button to return to the previous window.

Содержание DGS-3130 Series










































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды

D-Link DGS-3130 Series, Руководство по интерфейсу пользователя веб-сайта

Результаты поиска

Содержание DGS-3130 Series

Отзывы:

Похожие инструкции для DGS-3130 Series

Бренды по названию

Популярные бренды