CY8CKIT-025 PSoC® Precision Analog Temperature Sensor Expansion Board Kit Guide, Doc. # 001-65791 Rev. *J
5
Safety Information
Regulatory Compliance
The CY8CKIT-025 is intended for use as a development platform for hardware or software in a
laboratory environment. The board is an open system design, which does not include a shielded
enclosure. This may cause interference to other electrical or electronic devices in close proximity.
In a domestic environment, this product may cause radio interference. In this case, you may be
required to take adequate prevention measures. Also, the board should not be used near any
medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
may affect its performance and cause interference with other apparatus in the immediate vicinity. If
such interference is detected, suitable mitigating measures should be taken.
The CY8CKIT-025 as shipped from the factory has been verified to meet with requirements of CE as
a Class A product.
The CY8CKIT-025 contains electrostatic discharge (ESD) sensitive
devices. Electrostatic charges readily accumulate on the human body
and any equipment, and can discharge without detection. Permanent
damage may occur on devices subjected to high-energy discharges.
Proper ESD precautions are recommended to avoid performance
degradation or loss of functionality. Store unused CY8CKIT-025 boards
in the protective shipping package.
End-of-Life/Product Recycling
This kit has an end-of-life cycle five years from the date of manufacturing
mentioned on the back of the box. Contact your nearest recycler for
discarding the kit.
