Cyclone Analogic Beat Bot TT-78, Руководство по эксплуатации

Страница: 14 / 59

14
The modifier buttons
([ACCENT]
,
[FLAM]
, and
[ROLL]
) are used to edit
these properties and are programmed in much the same way as how
you programmed pattern steps in Lesson 4. They can be edited using
either of the techniques below while in Pattern Write mode with the
sequencer running.
Mode
Editing
When a modifier button is pressed then released,
the button illuminates to show that the modifier is
currently ready to be edited. The steps for the
selected instrument are displayed. Steps that are
on but do not have the current modifier applied are
shown in orange. Steps that have the current
modifier applied are shown in the modifier's color.
Pressing a
[#]
button will toggle the modifier for that
step. If the step is off, pressing its
[#]
button will turn
the step on and apply the modifier. Pressing
[TAP]
has the same effect.
Press or hold
[CLEAR]
to remove the modifier from
one or more steps as the sequencer plays.
To completely clear a step in this mode, press and
hold its
[#]
button for two seconds.
Press the modifier button again to exit this mode.
Quick
Editing
To quickly edit a modifier, press and hold the
modifier button then press the
[#]
buttons you want
to toggle. You can also hold the modifier button and
press
[TAP]
to assign the modifier to new steps as
they play.
Quick Editing mode automatically exits when the
modifier button is released.