Cyclone Analogic Beat Bot TT-78, Руководство по эксплуатации

Страница: 10 / 59

10
Lesson 4
Programming Your First Pattern
Patterns are programmed and edited in Pattern Write mode while the
sequencer is running. Let’s program a new pattern into pattern slot P1 in
your red pattern page:
1. Be sure the sequencer is stopped then turn the Mode Switch to
Pattern Write mode.
2. Set all the instrument level controls to the middle position.
3. If the
[PAGE]
button is not already a red color (Page 1), then
press
[PAGE]
until its color changes to red.
4. Press
[1]
to select pattern slot P1.
5. If necessary, clear the pattern in slot #1 (this is covered later in
Lesson 13) by pressing
[CLEAR]
+
[1]
. This initializes the pattern to
an empty 16-step pattern with a 16th note time scale (see
Lesson 9 to learn about time scales).
6. Press
[START/STOP]
to run the sequencer. You will see a cursor
move across the keypad at the tempo that's currently set by the
Tempo knob, but the pattern will be silent.
7. Program a simple beat for the Bass Drum. Set the
Track/Instrument switch to the Bass Drum (BD) position. Now
the display shows only the Bass Drum's part of the current
pattern, which is currently empty.
8. Press
[1]
, then
[8]
, then
[11]
. These buttons will illuminate after
being pressed to show that the Bass Drum will be played at
those steps in the pattern. You should hear the bass drum when
the playback cursor reaches steps 1, 8, and 11.