6
Lesson 2
Orientation
This lesson will acquaint you with your drum machine's physical layout.
The Drum Drone in shown below. The Beat Bot's layout is very similar.
Rear Connections (left to right, top view)
MIDI In
and
MIDI Out:
Accept standard 5-pin DIN type MIDI cables.
Refer to Lesson 20 for details on the machines' MIDI implementations.
MIDI Out/Thru Switch:
Select whether the
MIDI Out
jack operates as a
MIDI output (left position) or as a MIDI Thru jack (right position).
Instrument Outputs:
These 3.5mm mono jacks
provide the output of
one instrument or a submix of instruments so that you can isolate them
for external processing or mixing. When a cable is inserted into an
Instrument Output jack, that instrument will be removed from the main
mix at the
Output
and
Phones
jacks.
Phones:
An amplified stereo headphone jack for monitoring with
headphones.
Output:
This is the main mono audio output to an amplifier, effects, or
mixer.
Power Input and Switch:
The Drum Drone and Beat Bot accept
9V DC with negative polarity (barrel positive, center negative) at 300mA
or greater. The power on/off switch is located here as well.
Tip!
It is best to turn off the unit when not in use. Your patterns and
tracks are stored permanently whether or not power is applied.
Содержание Beat Bot TT-78
Страница 1: ...English Version 0 9 9 2016...