Cumberland Integra EXPERT 64EU, Руководство пользователя

Страница: 71 / 102

71
EXPERT 64EU rev.03
9. CLOCK OUTPUTS
The controller has up to 24 clock outputs to operate various devices using a real clock
timer. Each output can use up to 4 programs. Each program is made of a start and a
stop or a run time:
A clock output program can either be stopped after a user-defined running time or at
a precise hour of the day; the user must choose the appropriate method used to stop
the clock programs (Start/Stop or Start/Run). The Start/Run mode gives a little more
precision in the output’s stop time (since the seconds can be adjusted contrarily to
the Start/Stop mode). The graphics below illustrate both methods:
Select
8. Start/Stop Temperature
5. Clock Outputs*
* This menu is only available if clock outputs are activated (s. 4.5).
• Set the desired operation mode of the clock outputs. This mode is common to
all clock outputs.
• Select the desired clock output. The following timer settings apply to the
selected output.
• Set the start & stop times or
the start & run times for each
program of the selected clock
output.
GRAPHIC : Start/Stop Mode
ON
OFF
Start Time
(ex. 8h30AM) Stop Time
(ex. 9:00AM)
CYCLE
GRAPHIC : Start/Run Mode
ON
OFF
Start Time
(ex. 8H30 AM)
Run Time
(ex.30 min,15 sec.)
CYCLE
Main Menu
8. Start / Stop Temperature
9. Advanced Settings
Start / Stop Mode Start / Run Mode
Start / Stop Temperature Settings
4. Tunnel Curtain
5. Clock Outputs
Clock Output Settings
Clock Mode Start/Stop
Display Clock 1
1. On Time 8:00A
Off Time 8:15A
2. On Time 6:00A
Off Time 6:00A
3. On Time 6:00A
Off Time 6:00A
4. On Time 6:00A
Off Time 6:00A
Exit: Press Back Change: Press Modify
Press to Select an Item
Clock Output Settings
Clock Mode Start/Run
Display Clock 1
1. On Time
Run Time Hour 1
Minutes 30
Seconds 15
(...)
4. On Time
Run Time Hour 0
Minutes 0
Seconds 0
Exit: Press Back Change: Press Modify
Press to Select an Item
or