Cuisinart CRC400E, Руководство пользователя

Страница: 17 / 48

17
4 . ADVICE FROM CHEFS
• Cooking time for steaming may vary slightly depending on the
size of the food . The amount of water will therefore need to be
adjusted .
• If the steaming ends before the food is cooked properly, add
some cold water to the inner pot, replace the food and cover .
• Smaller foods cook more quickly than larger . We recommend
that you cook food of the same size together for even cooking .
• Carefully wash the rice several times in water and drain . Coo-
king will be perfect .
• At the end of cooking, when the rice is done and the “warm”
setting is on, stir the rice and leave in the automatic cooker a
few minutes longer for perfect cooking .
• To flavour and add taste to the preparations, add onion, thyme,
bay leaves, cloves when cooking white haricot beans, lentils,
etc .
5 . QUESTIONS/ANSWERS
WHAT DO I DO IF: ANSWERS
the preparation boils over
during cooking? Make sure the ingredients
do not exceed the maximum
level in the pot .
the food isn’t cooked
enough? There is not enough water for
cooking . Add water and begin
cooking again .
the rice cooker is still warm
after several hours? As long as the cooker is
plugged in, the “warm”
function stays on . Unplug the
rice cooker after each use .
my rice cooker doesn’t work? Make sure the appliance is
plugged in and that the pot
is in its base, then that the
“cook” function is properly
engaged .
my rice cooker stopped
during cooking? The pot was lifted or taken
out while the appliance was
operating . Re-set to “cook” .
6 . CLEANING AND STORAGE
When you have finished cooking, put the On/Off switch into the
“O” position, unplug the cord and allow the appliance to cool
completely before cleaning .
• The pot, steamer basket and lid may be washed in warm, soapy
water or in the dishwasher .
• If food sticks to the sides, fill the pot and bowl with warm,
soapy water and allow to soak before cleaning . Do not use scou-
ring pads or abrasive soaps that could damage the coating .
• To clean the appliance housing, use a damp cloth and a little
soft detergent . Do not use scouring pads or abrasive soaps .
DO NOT IMMERSE THE APPLIANCE HOUSING IN WATER OR ANY
OTHER LIQUID .