Contax SW 2524, Руководство пользователя, Страница: 53 / 322

Pre-Configuration Planning
976-0043-01-01 2–19
Wire size for AC
Connections #6 AWG THHN wire for all AC wiring (input and output) is
recommended.
Wire Routing
Determine all wire routes both to and from the inverter, and which
knockouts are best suited for connecting the AC conduits. Possible
routing scenarios include the following.
•
AC and DC grounds to an external ground rod
• AC input wiring from the main service panel to the inverter/charger
(on-grid applications only)
• AC input wiring from the generator to the inverter/charger (if used)
• AC output wiring from the inverter/charger to the sub-panel
• DC input wiring from the PV array to the controller/batteries
• DC input wiring from the batteries to the inverter/charger
• BTS cable from the batteries to the inverter/charger (keep separate
from battery cables)
• Remote control cable to the inverter/charger (if used)
• Load circuit wiring rerouted from the main service panel to the sub-
panel (on-grid applications only)
Generator Considerations
Note: A fuse without a switchable disconnect alone does not meet
NEC code.
Important: Check for existing electrical wiring or plumbing prior to
making cuts in the walls. Cut holes in the walls at appropriate locations
for routing wiring/cables.
Important:
The information contained in this manual is basic wiring
information which can be used to aid the generator manufacturer or
electrician in assisting with your installation. Xantrex is not responsible
for providing detailed technical support or wiring instructions for
generator operation.