Contax SW 2524, Руководство пользователя, Страница: 217 / 322

Operational Status Indicators
976-0043-01-01 8–9
LED Summary
Table 8-1 summarizes the LED indicators.
Table 8-1 LED Summary Table
LED Name OFF ON FLASHING
Grid Tie LED
(yellow) Not available
Invert LED
(yellow) Inverter is OFF. No
power is available
from the batteries in
case of a power
failure. The inverter is on and is
currently providing power from
the batteries to the load(s). SLOW FLASH (1 blink/4 sec):
Inverter is in Standby Mode and
is waiting to provide power to
the loads if the AC power is
lost.
FAST FLASH (1 blink/1 sec):
Inverter is on in Search Mode
and is waiting for a load to be
turned on that meets or exceeds
the Search Watts parameter set
in menu items 01C and 11E.
AC1 LED
(green) There is no AC
power present
(> 80 volts) on the
AC1 input terminal. AC power present on the AC1
terminal has been qualified (i.e.,
is within voltage and frequency
limits) and is providing pass-
thru power to the loads or AC1
is selected under the
01D Bypass Mode menu item.
AC power is present on the
AC1 input terminal. The AC
power may not be within
voltage or frequency limits or
may be waiting to be used
depending on the user settings
(e.g., BX mode, grid usage
timer)
AC2 LED
(green) There is no AC
power present
(> 80 volts) on the
AC2 input terminal. AC power present on the AC2
terminal has been qualified (that
is, is within voltage and
frequency limits) and is
providing pass-through power
to the loads.
This is only possible if there is
no AC power present on the
AC1 terminal or AC2 is
selected under the
01D Bypass
Mode menu item.
AC power is present on the
AC1 input terminal. The AC
power may not be within
voltage or frequency limits or
voltage may be present on the
AC1 terminals (AC1 input has
priority)
BULK LED
(green) Bulk or EQ charges
are not enabled A Bulk Charge is being
performed. An Equalize (EQ) charge is
being performed.
FLOAT LED
(green) Float Charge is not
enabled. Float charge is enabled.