Contax SW 2524, Руководство пользователя, Страница: 109 / 322

AC Wiring
976-0043-01-01 3–27
Table 3-1 Maximum AC Disconnect and Wire Sizing
Full Pass-
Through
Capability Maximum
Fuse/Breaker
Required Cable Size
Required in
Conduit
60 Amps 60 Amps #6 AWG (THHN)
WARNING: Fire Hazard
There is risk of fire if 120 Vac only sources (such as inverters
and generators) are wired incorrectly into 120/240 Vac
distribution panels containing multi-wire branch circuits.
See Appendix F, “Multiwire Branch Circuit Wiring” , which
describes how to check for multiwire branch circuits in the load
center and offers some possible solutions/alternatives to this
wiring method.
WARNING: Shock Hazard
Be sure to connect the ground wires first when connecting AC
wiring to prevent a potential shock hazard.
CAUTION: Damage to the Inverter
The inverter’s AC output must never be wired to the utility or
generator output. This will cause severe damage to the inverter
which is not covered under warranty.