Conrad Electronic FAZ 3000-PIR-2, Руководство по эксплуатации

Страница: 91 / 115

91
You can change the conditions for setting off the alarm as follows:
• You must be on the main level. The LCD should appear as on the right,
for example, with the time and the date.
• Briefly press the ‘ Menü a/A ’ button on the control unit of the ‘FAZ 3000-
Z’ alarm base station.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
al. dialler al. dialler
al. dialler al. dialler
al. dialler
’ menu (‘alarm
dialler’).
• Confirm your selection by briefly pressing the ‘ OK ’ button.
• Confirm your selection by briefly pressing the ‘ OK ’ button.
Please note the position of the cursor (‘_’). If the cursor is located pre-
cisely at this position (at the far right), you can use the ‘ ’ and ‘ ’ buttons
to switch between the three different states ‘
disarmed disarmed
disarmed disarmed disarmed
’, ‘
inter- inter-
inter- inter- inter-
n a l l y a r m e d n a l l y a r m e d
n a l l y a r m e d n a l l y a r m e d
n a l l y a r m e d
’ and ‘
e x t e r n a l l y a r m e d e x t e r n a l l y a r m e d
e x t e r n a l l y a r m e d e x t e r n a l l y a r m e d
e x t e r n a l l y a r m e d
’.
Here, the dash and number sequences correspond to the settings in
the tables on pages 89 and 90.
• Using the ‘ C ’ and ‘ ’ buttons you can select the required entry position
(cursor ‘_’ is located beneath the selected position).
You can change the value using the ‘ ’ and ‘ ’ buttons.
‘
1 1
1 1 1
’: The alarm is triggered via the alarm dialler
‘
0 0 0 0 0
’: No alarm is triggered via the alarm dialler
Positions that have a ‘
- - - - -
’ cannot be changed.
If the cursor is located at the far right (see the arrow in the figure on
the right) you can use the ‘ ’ and ‘ ’ buttons to switch between the three
different states ‘
d i s a r m e d d i s a r m e d d i s a r m e d d i s a r m e d d i s a r m e d
’, ‘
internally armed internally armed internally armed internally armed internally armed
’ and ‘
e x - e x - e x - e x - e x -
t e r n a l l y a r m e d t e r n a l l y a r m e d t e r n a l l y a r m e d t e r n a l l y a r m e d t e r n a l l y a r m e d
’.
• Pressing the ‘ OK ’ button applies the new settings.
• Exit the menu by pressing the ‘ C ’ button twice. This returns you to the
normal display mode (main level).
al. dialer
troubles
disarm
20:27 15.02
al. dialer
trigger
disarm
--000_
ext. arm
-1111_
int. arm
0-000_
disarm
15:43 09.02
ext. arm
-1101
ext. arm
-1101_
ext. arm
-1111
al. dialer
trigger.