Conrad Electronic FAZ 3000-PIR-2, Руководство по эксплуатации

Страница: 101 / 115

101
2. Silent alarm on/off
In the case of a silent alarm, the ‘FAZ 3000-Z’ alarm base station transmits the alarm via the PC
interface and/or the alarm dialler without the intruder noticing the alarm.
If transmission of the alarm is not possible, the internal and external sirens are activated after-
wards according to how they have been set.

Please note:
You can find the ‘silent alarm on/off’ setting in the PC interface’s settings and in the
alarm dialler’s settings.
Here, exactly the same setting applies!
This means: If you switch the PC interface’s silent alarm on, it is also au-
tomatically activated on the alarm dialler (also see page 92).
To set the ‘silent alarm’ function, proceed as follows:
• You must be on the main level. The LCD should appear as on the right,
for example, with the time and the date.
• Briefly press the ‘ Menü a/A ’ button on the control unit of the ‘FAZ 3000-
Z’ alarm base station.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
PC interf. PC interf.
PC interf. PC interf.
PC interf.
’ menu (‘PC
interface’).
• Confirm your selection by briefly pressing the ‘ OK ’ button.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
silent al. silent al.
silent al. silent al. silent al.
’ menu (‘silent
alarm’).
• Confirm your selection by briefly pressing the ‘ OK ’ button.
The state that is currently set appears on the LCD (factory set to ‘
no no
no no
no
’).
• Use the ‘ ’ and ‘ ’ buttons to select the setting you require:
‘
y e s y e s
y e s y e s
y e s
’: Silent alarm is switched on
‘
no no no no no
’: Silent alarm is switched off
• Pressing the ‘ OK ’ button applies the setting.
• Exit the menu by pressing the ‘ C ’ button twice. This returns you to the
normal display mode (main level).
PC interf.
troubles
disarm
12:10 18.02
PC interf.
trigger
PC interf.
silent al.
silent al.
yes
silent al.
n o
PC interf.
silent al.
disarm
12:12 18.02