background image

110

• As a result of the ‘FAZ 3000’ wireless alarm system’s long production time and the constant

improvements made by the manufacturer, several versions of the individual components now
exist, such as for the ‘FAZ 3000-Z’ alarm base station, the PIR motion detector or the remote
control, for example.

Despite all the variations in the design of the casing and the design of the enclosed circuit boards
there are, however, no known compatibility problems.

Your system should therefore still function properly, if you combine different versions.

If, for example, you use the predecessor of the ‘FAZ 3000-PIR-2’ (PIR motion detector) with
this version of the ‘FAZ 3000-Z’ alarm base station, then only the design of its casing is different
along with the resulting alternative assembly it requires.

The registering procedure and all the other functions for this predecessor are identical to those
of the current version of the motion detector.

The current ‘FAZ 3000-TF-2’ door/window detector in use when this user manual was issued
varies from its predecessor only in the number of batteries required to operate it along with
the alternative design of its circuit board.

If you find that the components in the ‘FAZ 3000’ wireless alarm system that you obtain
look a little different from those depicted in this user manual, please read the user manual
enclosed with the respective product when assembling or initially operating the device.

As already stated, any differences are limited to the appearance, alternative assembly
and possible variations in the technical data (for example, battery types, dimensions
and so on).

Содержание FAZ 3000-PIR-2




















































































































Отзывы: