Conrad Electronic FAZ 3000-PIR-2, Руководство по эксплуатации

Страница: 89 / 115

89
Alarm upon
smoke
detection
0
Alarm when
int. armed
-
Alarm upon
attack
0
Alarm upon
sabotage
0
Alarm when
ext. armed
-
i) Settings for the ‘FAZ 3000-AW-3’ alarm dialler
The following settings can be carried out for operation of the alarm dialler:
• Conditions for setting off the alarm
• Silent alarm on/off
• Enter telephone number 1, 2 and 3
• Enter dialout number
• Enter the alarm dialler’s access code for remote control via a telephone
• Remote control: Enabling of remote control, configuration of automatic call acceptance
• Entry of a service number (SN) for connecting to an emergency call centre
1. Conditions for setting off the alarm, changing the settings
For the alarm dialler the conditions for setting off an alarm can be set in detail, and dependent on
the states ‘disarmed’, ‘internally armed’ and ‘externally armed’.
Useful settings are already preset in the factory, however, you can change these settings to suit
your own personal requirements.

The alarm dialler is only active while you are not at home, thus for ‘externally armed’.
The alarm dialler is not activated for ‘internally armed’ and ‘disarmed’. If required, however,
this can be changed.
Table containing the factory settings for the ‘disarmed’ state:
‘Disarmed’ state
• It is not possible to trigger the alarm dialler for ‘internally armed’ and ‘externally armed’ because
of the current ‘disarmed’ state (each set to ‘-’).
• If a smoke detector is triggered, no alarm is effected via the alarm dialler (set to ‘0’)
• If a sabotage contact is triggered, no alarm is effected via the alarm dialler (set to ‘0’)
• In the event of an attack, no alarm is effected via the alarm dialler (set to ‘0’)