71
Fault elimination
7.5
Saving fault and service histories to a USB stick
The fault and service histories of the Condair DL can be saved to a USB stick for logging and further
analysis. For this purpose, proceed as follows:
1. Set the
<Control unit On/Off>
switch on the right side of the control unit to the Off position, then
switch off the voltage supply to the control unit via the external electrical isolator and secure switch
in the Off position to prevent it from inadvertent power up.
2. Unlock the front cover of the control unit and remove it.
3. Open control unit inner swing door.
4. Carefully insert FAT32 formatted USB stick into the USB port on the control board. Make sure that
the maximum length of the USB stick does exceed 75 mm (3").
5. Close control unit inner swing door, then relocate the front cover of the control unit and lock it with
the screw.
6. Remove the lock and tag from the external electrical isolator. Then, switch on external electrical
isolator switch to restore power to the control unit.
7. Set the
<Control unit On/Off>
switch on the right side of the control unit to the On position.
8. When the home screen appears:
• Select "
Menu > Password: 8808 > Maintenance > Histories > Export Error/Warning History
".
The last 80 events are then downloaded to the USB stick as separate .csv file (Automatically
generated file name: "ExceptionHistory_<DeviceType>_<Serial#>_<Date>_<Time>.csv").
• Select "
Menu > Password: 8808 > Maintenance > Histories > Export Service History
". The
last 20 events are then downloaded to the USB stick as separate .csv file (Automatically gener-
ated file name: "ServiceHistory_<DeviceType>_<Serial#>_<Date>_<Time>.csv").
9. Repeat steps 1 to 3, then carefully remove the USB stick.
10. Close control unit inner swing door, then relocate the front cover of the control unit and lock it with
the screw.
11. Repeat Step 6 and 7 to power up the control unit.
Содержание DL II
Страница 79: ......
