Condair DL II, Руководство по эксплуатации, Страница: 32 / 80

32 Operating the Condair DL control software
5.3.1.3 Date and time settings in the "Date & Time" submenu
Note: The date and time must be entered correctly, as these are used for the entries in the malfunctions
and maintenance history list.
09/01/2021 DL
07:00 pm
Date
Time
Date Format
Clock Format
Daylightsaving
Daylightsaving
09/01/2021
07:00 pm
MM/DD/YYYY
12H
Winterzeit
Wintertime
Date & Time
– Date : With this setting you determine the current date in the set format
("MM/DD/YYYY" or "DD/MM/YYYY").
Factory setting:
01/01/2020
– Time : With this setting you set the current hour of the day in the set time
format ("12H" or "24H").
Factory setting:
12:00
– Date Format : With this setting you determine the desired date format.
Factory setting: DD/MM/YYYY
Options: DD/MM/YYYY or MM/DD/YYYY
– Clock Format : With this setting you determine the desired time format.
Factory setting: 24H
Options: 24H (24 hours, display 13:35) or
12H (12 hours, display: 01:35 PM)
– Daylightsaving : With this setting you determine the daylight saving time
summer time / winter time).
Factory setting:
Wintertime
Options: Summertime or Wintertime
5.3.1.4 Read in parameter settings in the "Backup" submenu
09/01/2021 DL
07:00 pm
Load Parameters from
USB
Backup
– Load Parameters from USB : With this function you can read in parameter
settings that were previously saved on a FAT32 formatted USB stick. To
do this, the USB stick with the parameter settings must be inserted into
the USB interface on the control board. After pressing the selection field,
a confirmation dialog appears in which you have to confirm the loading
of the parameter settings again.