QoS Setting
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide
: 2000509 Rev. A
- 89
QoS Setting
QoS Setting
Use this subsection to set up QoS settings for the RocketLinx ES7528.
QoS Setting
Description
Queue Scheduling
Use a Round
Robin scheme
The Round Robin scheme means all the priority has the same privilege, the traffic is forward cyclic
from highest to lowest.
Use a strict
priority scheme
Packets with higher priority in the queue are always processed first, except that there is no packet with
higher priority.
Use Weighted
Round Robin
scheme
This scheme allows you to assign new weight ratio for each class. The 10 is the highest ratio. The ratio
of each class is:
Wx / W0 + W1 + W2 + W3 + W4 + W5 + W6 + W7 (Total volume of Queue 0-7)
Port Setting
Priority
Indicates the default port priority value for untagged or priority-tagged frames. When the RocketLinx
ES7528 receives the frames, the RocketLinx ES7528 attaches the value to the CoS field of the
incoming VLAN-tagged packets. You can enable 0,1,2,3,4,5,6 or 7 to the port.
Default priority type is
COS
. The system provides default COS-Queue table to which you can refer for
the next command.
Apply
Click
Apply
to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain these settings if the RocketLinx
ES7528 is powered off.
