(VLAN) Interface Configuration
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide
: 2000509 Rev. A
- 27
Feature Configuration
(VLAN) Interface Configuration
Press
interface VLAN
VLAN-
ID
in global configuration
mode. You can then enter
VLAN interface configuration
mode. In this mode, you can
configure the settings for the
specific VLAN.
The VLAN interface name of
VLAN 1 is VLAN 1, VLAN 2
is VLAN 2…
Type
exit
to leave the mode.
Type
?
to see the available
command list.
The command lists of the
VLAN interface configuration
mode.
This table is a summary of the five command modes
.
Command Mode
Main Function
Enter and Exit Method
Prompt
User EXEC
This is the first level of
access.
You can ping, telnet remote
device, and show some basic
information
Enter:
Login
successfully
Exit:
exit
to logout.
Next mode: Type
enable
to enter privileged
EXEC mode.
Switch>
Privileged EXEC In this mode, the system
allows you to view current
configuration, reset default,
reload switch, show system
information, save
configuration and enter
global configuration mode.
Enter: Type
enable
in User EXEC mode.
Exec: Type
disable
to exit to User EXEC
mode.
Type
exit
to logout
Next Mode: Type
configure terminal
to
enter global configuration
command.
Switch#
Global
configuration
In global configuration
mode, you can configure all
the features that the system
provides you.
Enter: Type
configure terminal
in
privileged EXEC mode
Exit: Type
exit
or
end
or press
Ctrl-Z
to
exit.
Next mode: Type
interface IFNAME/
VLAN VID
to enter interface configuration
mode
Switch(config)#
Port Interface
configuration
In this mode, you can
configure port related
settings.
Enter: Type
interface IFNAME
in global
configuration mode.
Exit: Type
exit
or
Ctrl+Z
to global
configuration mode. Type
end
to privileged
EXEC mode.
Switch(config-if)#
VLAN Interface
Configuration
In this mode, you can
configure settings for
specific VLAN.
Enter: Type
interface VLAN VID
in
global configuration mode.
Exit: Type
exit
or
Ctrl+Z
to global
configuration mode. Type
end
to privileged
EXEC mode.
Switch(config-vlan)#
Switch(config)# interface vlan 1
Switch(config-if)#
description Interface specific description
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
ip Interface Internet Protocol config commands
list Print command list
no Negate a command or set its defaults
quit Exit current mode and down to previous mode
shutdown Shutdown the selected interface
