26 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide
: 2000509 Rev. A
(Port) Interface Configuration
Feature Configuration
(Port) Interface Configuration
Type
interface IFNAME
in global configuration mode. You can then enter Interface Configuration mode. In this mode, you
can configure port settings.
The port interface name for Fast Ethernet port 1 is fa1, Fast Ethernet 7 is fa7, gigabit Ethernet Port 25 is gi25 gigabit Ethernet
Port 28 is gi28. Type the interface name accordingly, when you want to enter certain interface configuration mode.
Type
exit
to leave.
Type
?
to see the command list
Available command lists of the Port Interface Configuration mode.
Switch(config)# interface fa1
Switch(config-if)#
acceptable Configure 802.1Q acceptable frame types of a port
auto-negotiation Enable auto-negotiation state of a given port
description Interface specific description
dot1x IEEE 802.1x standard access security control
duplex Specify duplex mode of operation for a port
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
flowcontrol Set flow-control value for an interface
garp General Attribute Registration Protocol
ingress 802.1Q ingress filtering features
ip Interface Internet Protocol config commands
lacp Link Aggregation Control Protocol
list Print command list
loopback Specify loopback mode of operation for a port
mac MAC interface commands
mdix Enable mdix state of a given port
no Negate a command or set its defaults
poe Configure Power over Ethernet
qos Quality of Service (QoS)
quit Exit current mode and down to previous mode
rate-limit Rate limit configuration
sfp Small form-factor pluggable
shutdown Shutdown the selected interface
spanning-tree spanning-tree protocol
speed Specify the speed of a Fast Ethernet port
storm-control Enables packet flooding rate limiting features
switchport Set switching mode characteristics
