Global Configuration Mode
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide
: 2000509 Rev. A
- 25
Feature Configuration
Global Configuration Mode
Enter
configure terminal
in privileged EXEC mode. You can then enter global configuration mode. In global configuration
mode, you can configure all the features that the system provides you.
Type
interface IFNAME/VLAN
to enter interface configuration mode,
exit
to leave.
?
to see the command list.
Available command lists of global configuration mode.
Switch# configure terminal
Switch(config)#
access-list Add an access list entry
administrator Administrator account setting
clock Configure time-of-day clock
default Set a command to its defaults
dot1x IEEE 802.1x standard access security control
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
gmrp GMRP protocol
gvrp GARP VLAN Registration Protocol
hostname Set system's network name
interface Select an interface to configure
ip IP information
lacp Link Aggregation Control Protocol
list Print command list
lldp Link Layer Discovery Protocol
log Logging control
mac Global MAC configuration subcommands
mac-address-table mac address table
mirror Port mirroring
nameserver DNS Server
no Negate a command or set its defaults
ntp Configure NTP
poe Configure Power over Ethernet
ptpd IEEE1588 Precision Timne Protocol
qos Quality of Service (QoS)
redundant-ring Configure redundant ring
relay relay output type information
router Enable a routing process
sfp Small form-factor pluggable
smtp-server SMTP server configuration
snmp-server SNMP server
spanning-tree spanning tree algorithm
system System setting
trunk Trunk group configuration
vlan Virtual LAN
warning-event Warning event selection
write-config Specify config files to write to
