Comtrol RocketLinx ES7528, Руководство пользователя

Страница: 23 / 144

Feature Configuration RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide
: 2000509 Rev. A
- 23
Feature Configuration
This section explains how to configure the RocketLinx ES7528 software features. There are four ways to access the
RocketLinx ES7528. For information about accessing a configuration method, see the appropriate subsections.
•
Serial console (
Using the Serial Console
on Page 19)
• Web browser (
Using a Web Interface
on Page 16)
• Telnet (
Using a Telnet Console
on Page 21)
This section discusses the configuring these software features:
•
Command Line Interface Introduction
•
Basic Setting
on Page 29
•
Port Configuration
on Page 47
•
Power over Ethernet
on Page 58
•
Network Redundancy
on Page 69
•
VLAN
on Page 79
•
Traffic Prioritization
on Page 88
•
Multicast Filtering
on Page 95
•
SNMP
on Page 101
•
Security
on Page 105
•
Warning
on Page 117
•
Monitor and Diag
on Page 127
•
Device Front Panel
on Page 136
•
Save to Flash
on Page 137
•
Logout
on Page 137
Command Line Interface Introduction
The Command Line Interface (CLI) is the user interface to the RocketLinx ES7528 embedded software. You can view the
system information, show the status, configure the switch, and receive a response back from the system by keying in a
command.
There are several different command modes. Each command mode has its own access ability, available command lines and
uses different command lines to enter and exit. These modes are:
•
User EXEC Mode
on Page 24
•
Privileged EXEC Mode
on Page 24
•
Global Configuration Mode
on Page 25
•
(Port) Interface Configuration
on Page 26
•
(VLAN) Interface Configuration
on Page 27
Refer to
Preparation for Management
on Page 15 on Page to access the CLI.