Comelit VEDO 2.6 Series, Руководство по программированию

Страница: 68 / 100

68
1
2
3
4
ID
Timer
8
5
7
6
ID
Timer 3
Timer 4
Timer 5
Timer 6
Timer 7
Timer 8
office area
1
2
3
4
8
5
7
6
START 1 STOP 1 START 2 STOP 2 START 3 STOP 3 START 4 STOP 4
07:00
04:00 21:00
23:00
Description
Activation
Description
Timer 2 Type
Timer 3 Type
Timer 4 Type
Timer 5 Type
Timer 6 Type
Timer 7 Type
Timer 8 Type
warehouse
3.13 TIMETABLE PROGRAMMER
3.13.1 Timer
This section allows you to configure Timers and timed or automatic activations. The timers relate mainly to time-dependent authorisations (e.g. you can
enable keypads to perform operations only within certain timeframes) and conditions on outputs.
The control panel provides eight different timer configurations. Each configuration is associated with up to sixteen possible configurable timeframe
timers. The figure shows only 9 for the sake of convenience.
Numerical box; uniquely identifies the timer.
Numerical box; uniquely identifies the specific timer.
Alphanumeric box, assigns an ID to the timer. For example, you might want to change the description "Timer Type 1" into "Activation" for the purpose
of quick identification in the subsequent selection menus.
Checkbox; when selected, enables operation of the selected timer.
Alphanumeric box, assigns an ID to the specific timer. For example, you might want to change the description "Timer 1" into "Office Area" for quick
identification. Each timer (you can configure up to sixteen for each timer configuration) has up to four Timer On/Off cycles, whose trigger times can
be freely configured.
Time box, for entering the start time of interval x.
Time box, for entering the end time of interval x.
See description “Panel for Periods/calendar management section” on page 98.
ID
ID
DESCRIPTION
ENABLE
DESCRIPTION (TIMER TYPE)
ONX
OFFX
STATUS/DESCRIPTION PANEL
PANEL FOR GROUPING TIMED ACTIVATION/DEACTIVATION OF TIMERS
PANEL FOR PERIODS/CALENDAR MANAGEMENT SECTION