45
An alphanumeric field; shows the name of the area (Area n by default) or the name that will be assigned to it by modifying the default in the Areas
section.
Checkboxes; if selected, enable the user to operate on the corresponding areas.
Allows editing of the selected user code.
Button, allows you to remove the code for the selected position.
Drop-down menu, can be used to associate a Timer with a code. This code can carry out the functions for which it was programmed, only when the
Timer is active and in the START time band.
• Unlimited:
checkbox; if selected, there is no limit on the number of operations that the selected user can perform within the course of a day.
• Numerical box
: allows you to set a limit on the number of operations that the selected user can perform within the course of a day. The
operations counter is reset at midnight.
This section is for setting the control components with which the selected user is authorised to operate. If a user attempts to operate on a keypad for
which he is not authorised, once he has typed in his code, the keypad display will show an error message.
• Keypads / readers:
• Keypads/Safetouch/Touch devices/RFID readers: tab with a group of checkboxes; the selected checkboxes enable the selected user
to operate on the corresponding devices. The unchecked checkboxes, conversely,
prevent the user from performing any operation on the corresponding devices.
AREA
ENABLE
RESET CODE
DELETE CODE
ASSOCIATED TIMER
NUMBER OF OPERATIONS
KEYPAD/READER AUTHORISATIONS
AREAS PANEL
CONFIGURATIONS PANEL
• PSTN (voice menu):
checkbox; if selected, authorises the user to use the voice interface via the PSTN telephone line. The Messages module
must be present.
• Access via web:
checkbox; if selected, authorises the user to use the web interface to connect to the control panel web server. The IP
communication module must be present.
• USB:
checkbox; if selected, authorises the user to access the control panel, using the Safe Manager program connected to the control panel
USB port. A user could therefore access certain functions made available by the program, such as, for example, real-time display of
system status.
• GSM (voice menu - SMS commands):
checkbox; if selected, authorises the user to use the voice interface via the GSM network. Also
enables the user to send commands and receive status SMSs from the control panel. The GSM
communication module and the Messages module must be present.
• Domotics:
not used.
• Use App:
used to enable the Phone App for the selected user.
When you select the position of a user with the mouse, you can immediately check whether keys or radio controls have been associated to that user.
At the same time, it will be possible to identify precisely which keys and/or radio controls are involved.
KEYS AND RADIO CONTROLS ASSOCIATION WINDOW
Checkbox; if selected, enables the user to send Robbery alarms by means of a Robbery code.
Checkbox; if selected, prevents the user from activating the alarm when there are areas in alarm.
ROBBERY CODE
DISABLE ACTIVATION WITH AREAS IN ALARM
See description
Send Message options on page. 89
.
All active devices must permit the control panel to send notification to the digital communicator for events generated by the device itself [Reg. 16].
SEND MESSAGE OPTIONS
Содержание VEDO 2.6 Series
Страница 99: ...99...
