Comelit VEDO 2.6 Series, Руководство по программированию

Страница: 36 / 100

36
Description
Group in AND 1
Group in AND 2
Group in AND 3
Group in AND 4
Time
window
(hh:mm:ss)
Groups in AND
Group in AND 5
Group in AND 6
Group in AND 7
Group in AND 8
00:00:00
00:00:00
00:00:00
00:00:00
00:00:00
00:00:00
00:00:00
00:00:00
ID
1
2
3
4
5
6
7
8
ID Description Zone Type
Double
Expansion type
3.5 GROUPS IN AND
The control panel has 8 virtual zones whose behaviour depends on groups of real zones, which are assigned at the configuration stage to one of the 8
zones in AND.
When 2 or more zones are assigned to a zone in AND, all of them have to be violated within a specific time limit (measured from the first violation) for an
alarm state to be generated. The alarm state enables each real zone to generate an alarm according to its configuration.
STATUS/DESCRIPTION PANEL
ZONES IN AND DESCRIPTION PANEL
Uniquely identifies the virtual zone.
Uniquely identifies a real zone associated with the zone in AND.
Shows the description set for the real zone at the time of its configuration.
Describes the type of real zone (e.g.: Wired Zone or Radio Zone).
Describes the module to which the real zone is connected.
Checkbox; if shown selected, it means that the zone is double type.
An editable, alphanumeric field, in which you can enter a specific, customised name for the group. For example, you might want to change “Zone in
AND 1” to “Corridor Group” for the purpose of rapid identification of the function of the output.
If you select with the mouse a position relating to a zone in AND to which real zones are associated, the field on the right-hand side will display
information about the individual associated real zones. The data are not editable
An editable, numerical box; determines the time within which the individual zones associated with the Zone in AND must be violated for an alarm
state to be generated.
ID
ID
DESCRIPTION
ZONE TYPE
EXPANSION TYPE
DOUBLE
DESCRIPTION
TIME WINDOW