58
Telephone Options
Answer
Priority management
Priority
SMS
MMS
Email
Voice call
Digital communication
Call
PSTN settings
Number of rings (only PSTN)
send message requesting user code input:
Telephone line check
Tones check
End call with keys
Skip fax (only PSTN)
Pulse dialling
Telephone line parameters
3
Message repetitions
5
Pause between repetitions
1
Code recognition time (sec.)
20
Tones recognition timeout (sec)
10
Maximum duration of single call (sec)
60
Voice delay / wait duration (sec)
10
Voice message repetition
3
Pause between repetitions (sec)
1
Attempts
3
Italy/Malta
Switchboard
Prefix number
Telephone signaller parameters
Send message after
Press key 1
3.12 COMMUNICATOR
3.12.1 Telephone Options
• Number of rings (only PSTN):
numerical box, allows you to set the number of rings that the control panel must wait for before engaging the
line after an incoming telephone call.
• Send message requesting user code input:
checkbox; if selected, allows the control panel that has replied to a telephone call, to generate an
audio message requesting the input of a valid user code, via the keypad of the calling telephone.
Also applies to communication on GSM network.
• Skip fax (only PSTN):
checkbox; if selected, enables the fax/answering service override mechanism. Fax/answering service override function:
the calling user makes the device ring once only and then ends the call. If a new ring is detected within no more than
120 seconds, the control panel obtains the line immediately, regardless of the number of rings set in Number of Rings.
• Message repeats (for future uses):
numerical box, allows you to set the number of times the welcome message must be repeated.
• Pause between repeats (for future uses):
numerical box, allows you to set the pause between repeats of the message.
• Code recognition time (sec.):
numerical box, allows you to set the maximum time within which a valid user code must be entered, after the
request for input by the control panel.
• Tones recognition timeout (sec):
numerical box, allows you to set the maximum waiting time for completing the user code once its entry has
been started.
= 60 sec [Reg. 61]
• Telephone line parameters:
drop-down menu, allows you to set the line parameters according to the specifications of the country in which the
control panel is installed (Italy/Malta, Czech Republic/Slovakia, Slovenia, Croatia, Greece, Bulgaria, Gibraltar, CI
Jersey/Cyprus/UK, Hungary).
• Pulse dialling:
if selected it dials the telephone number in pulse mode.
• Tones check:
if selected it checks the line free tone before dialling the telephone number.
Selected [Reg. 67]
• Telephone line check:
checkbox; if selected, it enables telephone line checking. If the telephone line is faulty or not connected, a fault alarm
is generated
Selected [Reg. 68]
• Prefix number (switchboard):
by entering this parameter, all the outgoing calls from the PSTN will add this number as a prefix to all the
numbers saved in the telephone directory and in the digital communicator. The check for a dial tone will be
performed only after the prefix is dialled.
Empty [Reg. 133]
• Send message after:
drop-down menu (see table), allows you to put the telephone signaller audio message online after obtaining the line after
a call, according to the procedure set in the drop-down menu.
= Press key 1 [Reg. 65]
ANSWER
CALL
PSTN SETTINGS
TELEPHONE SIGNALLER PARAMETERS
Содержание VEDO 2.6 Series
Страница 99: ...99...
