2.2 Wall mounting
• Proceed with wall mounting using the paper template and secure the bottom of the panel using the wall anchors and
screws provided.
• Choose the inputs for the signal cables (loops, sounders, etc.) and for the main power supply cable, and remove the pre-
perforated metal plugs only from the holes used to route the cables.
• Route the cables over the metal base of the panel.
• Connect the mains power supply and the earth cable to the power supply terminal and make sure the connections are
secure;
DO NOT
switch on the main power supply at this stage.
• Position the battery upright and secure it with the metal clamp.
• Perform the necessary cable wiring.
• Once the connections have been made, power the panel; after the test phase is complete and when the panel is working
normally, close the front door using the key supplied.
• Keep the keys in a safe place that can only be accessed by authorised technical personnel.
400mm
1500mm
1
2
3
4
5
6
6
1. Holes for fixing the panel to the wall
2. Cable routing holes
3. Electrical power cable routing hole
4. Battery support bracket
5. Cable routing opening
6. Holes provided for modular mounting
CAUTION: fire panel 41CPE118 is also designed for flush mounting in conjunction with frame Art. 48BIA100.
8
