Digital fire detection control panel
LYON
FIRE PROTECTION MANUFACTURER
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
60
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - [email protected] -
www.cofem.com
PHONE 1 NUMBER PROGRAMING
PHONE 2 NUMBER PROGRAMING
PHONE 3 NUMBER PROGRAMING
PHONE 4 NUMBER PROGRAMING
PHONE 5 NUMBER PROGRAMING
SITUATION MESSAGE PROGRAMING
Message sent to the phones configured in the previous options
CONFIGURE CONTROL PANEL NUMBER:
SET CONTROL PANEL NUMBER.
CONTROL PANEL NUMBER:
VISUALIZE THE CONTROL PANEL NUMBER.
TYPE OF PC COMMUNICATION:
The communication ports of the control panel are configurable with the different available
functionalities. The control panel has 3 RS485 communications ports identified as CONPC
(COM1), CONRED (COM2), CONREP (COM3) and a USB port identified as USB (USB1). In
this menu you can select the port you want to use with the following features:
NeTW:
Connection port for connecting control panels in network.
RePT: Connection port for connecting repeater.
iLNK: Connection port for control panel software configuration I-Link or I-Link ONLINE.
C_ID: Connection port for ContactID.
MoDB: Connection port for MODBUS.
ReMT: Connection port for REMOTE card.
C o m m u n i c a t i o n m o d e
N e T W :
C O M 2
R e P T :
C O M 3
i L N K :
U S B 1
C _ I D :
-
-
M o D B :
-
-
R e M T :
C O M 1
E N T E R :
S A V E ,
O P T I O N S :
U P - D OW N ,
E S C :
O U T
INTERNAL NETWORK:
AUTODETECT CONTROLLERS: In this menu, all the connected controllers are
detected and configured. This function deletes the previously configured controllers.
ERASE LOOP CONTROLLER: Erase the selected loop controller from the
configuration of the control panel.
ERASE SUPPLY CONTROLLER: To erase the selected power supply controller
from the configuration of the control panel.
CONSULT VERSION: Check the software versions for the CPU circuit (control
panel version) and for the different loop controllers (controller version) which may
be connected.
REMOTE CONECTION:
It allows configuring the following communication parameters of the REMOTE card in the ethernet network.
IP: Defines the IP address of the REMOTE card in the internal network. By default
192.168.0.254.
PORT: Defines the port of the REMOTE card. The server / router must be configured to
allow communication between the REMOTE card and the external network. By default the
value is 80.
MASK: Mask of the server / router that differentiates the IP addresses of the internal and
external network. Based on the IP address of the server / router, the "0" values identify the
internal addresses. By default, the value of the mask is 255.255.255.0.
GATEWAY: IP address of the server / router. By default the value is 192.168.0.50.
UMIP: Acronym for "Update My IP". With the activation of this function, it is allowed to
communicate with the REMOTE card of the central from the web "www.l-remote.com"
automatically without needing to know the IP address of the server / router.
SERIAL NUMBER: It is the serial number of the REMOTE card needed to identify it on the
web "www.l-remote.com".
