Digital fire detection control panel
LYON
FIRE PROTECTION MANUFACTURER
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
8
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - [email protected] -
www.cofem.com
1.3.- Characteristics
Base control panel configurable and expandable from 1 to 20 loops.
Allows 199 connection elements per loop.
All the loop elements are monitored, except the
KABY
loop isolator.
Capacity for up to 199 configurable relays.
Enables programming of 99 zones.
File that stores up to 4095 events with date and time
Monitored delayable general siren output identified as “
S1 SIRENA”
(sounder).
Voltage-free non-monitored alarm output identified as “
S2 ALARMA”
(Alarm).
Non-monitored delayable free voltage general failure output identified as “
S3 AVERIA”
(Fault).
Evacuation button.
Backlit LCD display of 4 lines and 40 characters.
Incorporates Spanish, English, French, Portuguese, etc, languages.
Configurable and manageable through PC I-Link software.
Allows connection to an external keyboard (PC standard – PS2).
Allows connection of up to 15 repeaters and 15 network control panels.
MODBUS (See specific manual of this functionality).
Contact ID (See specific manual of this functionality).
Cofem REMOTE.
Size: 424 x 330 x 140 mm
IP30.
Certified and CE marked according to EN 54-2 and EN 54-4 Standard.
1.4.- Composition of the control panel
Backlit LCD display of 4 lines and 40 characters.
Keyboard made up of 13 keys that form two groups; one where the menu handling keys can be
found and the other where specific control panel functions may be performed.
15 LEDs that enable quick viewing of the control panel status (Supply, Mode of operation,
Alarms and Failures).
Communications port: USB 2.0.
Access to the interior of the control panel by means of a key.
Power supply: independent module responsible for controlling the Voltage of the primary 30V
supply that supplies the other boards. In this there are: protection fuses, 30V output, battery
connection terminals, relay outputs:
S1 SIRENA (Sounder): delayable monitored relay.
S2 ALARMA (Alarm): Voltage-free relay.
S3 AVERIA (Failure): free voltage delayable relay
Power supply controller: card that manages all the power supply information, that is to say,
monitors and controls the outputs and inputs of the power supply to subsequently send the
information to the CPU or to execute the instructions that it receives from the latter. The
communication is performed via RS485.
System managed by microprocessor.
Loop controller: modular cards incorporated into the rack system connected to the control panel
back panel (circuit with connectors and guides from the top left part). This card manages the
information corresponding to 4 loops, that is to say, for every 4 loops we must have a loop
controller. The communication between controller and the CPU are performed by means of
RS485.
Loop driver: modular cards incorporated in the rack system, located inside the box and
connected to its corresponding loop controller by means of a flat 26 strand cable. These are
configured as 1 or 2 loops depending on the number of loops of the control panel. The driver of
