Digital fire detection control panel
LYON
FIRE PROTECTION MANUFACTURER
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - [email protected] -
www.cofem.com
55
Review relays:
This submenu is the same as the one to review the complete history except that is
exclusively for relays.
Type of event Alarm type
N U M : 0 0 4
A C T UAT I O N 0 0 1
S E L F A C T I V
L O O P :
0 3
P O I N T : 0 0 2
N . P r o g
:
0 0 0 0 2
Z O N E : - -
C . P A N E L : 0 1
0 1
⁄
0 1
⁄
0 7
1 2 : 0 1
L A B E L :
B : 3
P : 2
N S : 2
3.2.3- Level 3 access.
3.2.3.1- Access code.
When entering the SYSTEM CONFIGURATION menu, we gain access to level 3 by means of a
code (9000). From this menu we can configure the whole system.
3.2.3.2.- Label elements.
O
ption 1 of the SYSTEM CONFIGURATION menu. We will have to introduce the loop and
element number to label. This is an option that allows us to label each element of the system, that is to say, to
give each point a description that gives us the information necessary to physically locate it in the installation.
The label can have a maximum of 20 characters. This is the screen that appears during the labelling process:
E N T E R
T E X T :
O F F I C E
M E N U - > C O P Y
R E S E T - > P A S T E
E N T E R - > A C C E P T
In order to introduce the label we can use the control panel cursors or an external keyboard.
3.2.3.3.- Configure.
Option 2 of the SYSTEM CONFIGURATION menu.
3.2.3.3.1.- Loop configuration.
Option 1 of the CONFIGURE menu. In this menu we have the possibility of configuring all the
parameters related to the element of a loop such as: to assign the element numbers, to detect the elements, to
configure sensitivity, etc.
Within the LOOP CONFIGURATION menu we have three important submenus that are:
SENSITIVITY OF A TYPE: This submenu allows us to vary the sensitivity of all the
sensors configured in the loop according to the type. Sensitivity has three levels HIGH,
AVERAGE and LOW (all the sensors come with average sensitivity).
FLASHING: This submenu allows us to enable/disable the blinking of all the elements
configured in the loop.
POINT CONFIGURATION: In this submenu we will be able to detect the elements that
are connected to the loop and to assign a point number to them. Within this submenu we
have seven submenus:
VIEW LOOP INFORMATION: In this submenu we can see the number of elements
that are in the loop classified by type.
L O O P :
0 1
A 3 0 X H A
⁄
S : 0 0 4
S I R A Y : 0 0 0
P O I N T S : 0 0 5
A 3 0 X T A
: 0 0 0
M D A x Y : 0 0 0
A 3 0 X H T C O : 0 0 0
M S T A Y : 0 0 0
M Y O A
: 0 0 0
P U C A Y
: 0 0 1
K M A Y : 0 0 0
