COBHAM Sea Tel 2400, Руководство по установке

Страница: 34 / 120

Installation in 144” Radome Sea Tel 2400 Dual Band C/Ku
4-12
EAR Controlled - ECCN EAR99
48. Remove the 4 nylock nuts
from the bolts that pass up
through the wood and lower
isolation plate.
49. Discard this hardware.
50. Remove the 4 bolts in the U-
bracket that restrains the
Right side (shown) of the
cross-level beam.
51. Remove the 4 bolts in the U-
bracket that restrains the Left
side (hidden in foreground) of
the cross-level beam.
52. Remove the foam padding
from both sides of the cross-
level beam.
53. Discard this hardware.
54. Pass lifting straps through
eyes in the top of the cross-
level beam. These starps
must be long enough to clear
the top of the waveguides (as
seen in the next picture).
55. Attach these 2 straps to a
crane or orther suitable lifting
mechanism.