COBHAM Sea Tel 2400, Руководство по установке

Страница: 31 / 120

Sea Tel 2400 Dual Band C/Ku Installation in 144” Radome
4-9
EAR Controlled - ECCN EAR99
17. There is an AC Power Strip
mounted on the sawhorse.
When the Az Post/Sawhorse
is installed on the base frame
this AC Power Strip should be
orientated to the left of the
base hatch.
18. The Internal Marine Air
Conditioner is mounted under
the sawhorse.
19. The Pedestal & Air
Conditioner Circuit Breaker
box is on the end of the
sawhorse closest to the hatch.
20. Use a Phillips #2 screwdriver
to remove the 4 screws in the
front plate of the Air
Conditioner Controller.
21. Set the Controller front panel
aside.
22. Apply a drop of Loctite 243
to 2 Controller mounting
screws and mount the
controller box to the top of
the Aft end of the sawhorse.
23. Apply a drop of Loctite 243
to the 4 screws removed from
the controller front panel.
24. Set the controller front panel
on the box and reinstall the 4
screws.
25. Unbolt the reflector brace
from the frame and remove it
from in front of the lower
section of the reflector.
26. Discard this hardware.