COBHAM Sea Tel 2400, Руководство по установке

Страница: 100 / 120

Maintenance Sea Tel 2400 Dual Band C/Ku
16-4
EAR Controlled - ECCN EAR99
13. Rotate the feed to align the
Linear drive motor directly
over the lower left strut.
14. Apply Loctite 242 to, install
and tighten the eight screws
(see red arrows) through the
front of the scalar plate and
into the end of the drop-in
feed assembly.
15. Route the
BLUE
leg of the
harness from the
lower
interconnect PCB to the right
strut, up to the top strut and
over the dish (with the red
harness leg & coax).
The
BLUE
leg of the harness attaches
to the
lower
interconnect PCB.
The
RED
leg of the harness attaches to
the
upper
interconnect PCB.
16. On the back side of the reflector:
•
If your antenna is a standard 9711 system, connect the harness to the “Feed” DB25
port on the PCU.
•
If your antenna is a 9711QOR system, connect the harness to the “Reflector A” DB25
port on the QOR Switch Box.